UG8.0，Since it was acquired by SIEMENS, it has been renamed NX.NX8.0，As a very good 3D mold design software. He can provide a proven solution to the user’s virtual product design and process design needs. It is loved by many users for its comprehensive design concept and good interface. UG8.0 adds duplicate commands and constraints to previous versions.Navigator, read-only component prompts and creates layer classification tool.
The blogger here provides ug8.0 crack Chinese version download, contains 32 and 64 bits of two packets, with crack files, the following is a detailed installation tutorial, you can install in accordance with the steps.
Download address:UG8.0
Matters needing attention
1、It is recommended to uninstall the old version of UG and prevent incompatibility.
2、There should be no Chinese word for installation path, including the installed computer name.
3、NX8.0.licIt’s a license document, please do not change it.
4、Data packets stored in Baidu SkyDrive, no friends, please advance Baidu SkyDrive.
5、The package has been packaged into a compressed package, and no decompression software is recommended to download “good pressure”.
UG8.0Installation tutorials
First, install license documents.
1、Take 32-bit computer for example, 64-bit installation method is similar, first build a ug8 folder in the C disk, and in the subdirectory UG and uglic folder. As shown in the following figure
2、Download and unpack the packet, find NX_8.0.0.25_Win32_crack_SSQ — NX 8.0lic under the UGS Insight folder, and copy it to the c/ug8 file.
3、Use Notepad to open NX8.0, replace your computer name with “this name”, CTRL+S save
4、Back to the packet, run Launch.exe, pop up the following window, click “install license server”.
5、The middle of the simple steps do not go much further, install the directory folder to select the c/ug8/uglic folder that you just started to establish on the C disk.
6、Using license file, directory is c/ug8/ug8.0.lic
7、Wait for a few minutes… License installation is completed..
Two. Install the ug8.0 main program.
a、Back to the installation of the initial interface, select “install NX”.
b.Select “typical” mode installation
c.Installation path selection c/ug8/ug
d.Default here, do not change.
e.Language choice “simplified Chinese”
f.In installation, it will take about 20 minutes.
Three, crack steps
1）Open the installation directory and replace the five files under the NX_8.0.0.25_Win32_crack_SSQ folder with the files under the installation directory c/ug8/ug. Select Copy and Replace
2）Replace the license installation directory C: ug8 uglic with ugslmd.exe under NX_8.0.25_Win32_crack_SSQ/UGSLicensing, and select Copy and replace
3）The last step: Start menu — program — UGS license — LMTOOLS – “start / stop / reread” — click “stop server” and stop server appears later.
4）After clicking “start server” and appearing server start successful, ug8.0 has successfully cracked.
Note: the above two steps need to be repeated several times to succeed.
5）Congratulations on your success. You can use the NX8.0 cracked version free of charge.
UG8.0New characteristics
1、More concise NX? 8 menu icon and annotation input negative?
2、Reorder?BlendsThe intersecting inverted circles can be sorted again.
3、NX8.0New duplicate orders?
4、In historical mode, the area boundary area is enhanced when the pull out area and offset area are taken. As long as there is a closed curve on the surface, it is not the whole surface that is selected but the surface in the curve.
5、Choosing between components in synchronous modeling supports functional commands such as coplanarization, coaxiality, and alignment.
6、Holes can change the type when editing holes.
7、Edge circles and soft circles support the two degree curves.
8、Extract equal parameter curves, and the curves are related to the original model.
9、Expression enhancements: Support for international languages, including Chinese (related to your local system language), can refer to attributes of other parts and other objects.
10、Added constraint Navigator: you can analyze and organize constraints.
11、Add the Make? Unique command, or rename the component, and you can change the name of the component in the open assembly to get the new component.
12、The editing status is enhanced, and multiple components and different levels of components can now be edited.
13、New read-only parts prompt
14、NX8.0Creating standard reference sets for management
15、Cross?SectionCommand enhancement now supports the use of this command in historical mode.
16、Delete face enhancement: increase repair function.
17、GCA spring modeling tool is added to the toolbox.
ug8.0Use of skills
1、The “entity density” in the editor is used in conjunction with the “quality attribute” in the analysis for quotation or other analysis.
2、Analysis – slope command is mostly used for pattern analysis. [plastic parts validation], [extract] and color filter are often used together.
3、UG4.0The delete order is in the edit menu, while the UG6.0 version is in the synchronous modeling tool.
4、The quality of using UG to move out of 2D graphics DXF format is better than that of DWG format.
5、UGFrom the higher version to the lower version of the common x_t format; igs, STP is a three-dimensional image sharing format, IGS based on the surface, STP based on the body, step format can be directly modified suffix named STP open.
6、After the original 3-D product drawing is exported to 2-D, the whole image (with Y coordinate axis as the reference image) and zoom-in and zoom-out are used to draw the die assembly drawing in CAD software.
7、ug8.0Copy translation method
Step: edit and move objects. There are several ways to copy the original in the result, and enter the number in the number of non associated copies. Final determination
8、UG8.0Shortcut key setting method
In the toolbar, press the right mouse button, pop-up menu and select “customize” to open, there is a “keyboard” at the bottom, go in, find the command to modify the shortcut key, and then directly type the shortcut key below OK.
If shortcut keys are occupied, there will be hints.
ug8.0Shortcut key commands
File (F) – new (N)… Ctrl+N UG_FILE_NEW Global
File (F) – Open (O)… Ctrl+O UG_FILE_OPEN global.
File (F) – close (C) – all components (L) F4 UG_FILE_CLOSE_ALL Global
File (F) – save (S) Ctrl+S UG_FILE_SAVE_PART Global
File (F) – save as (A)… Ctrl+Shift+A UG_FILE_SAVE_AS Global
File (F) – drawing (L)… Ctrl+P UG_FILE_PLOT Global
File (F) – execute (T) -Grip… Ctrl+G UG_FILE_RUN_GRIP Global
File (F) – execution (T) – debug Grip (D)… Ctrl+Shift+G UG_FILE_RUN_GRIP_DEBUG Global
File (F) – execution (T) -NX Open… Ctrl+U UG_FILE_RUN_UFUN Global
File (F) – finish K (Ctrl+Q) UG_DIRECT_SKETCH_FINISH Application module only.
Q Application module only
Editor (E) – undo list (U) -1 view cross section Ctrl+Z UG_EDIT_UNDO Global
Editor (E) – redo (R) Ctrl+Y UG_EDIT_REDO Global
Editor (E) – cut (T) Ctrl+X UG_EDIT_CUT Global
Editor (E) – copy (C) Ctrl+C UG_EDIT_COPY Global
Editor (E) – paste (P) Ctrl+V UG_EDIT_PASTE Global
Editor (E) – delete (D)… Ctrl+D UG_EDIT_DELETE Global
Delete Overall situation
Editor (E) – select (L) – highest selection priority feature (F) Shift+F UG_SEL_FEATURE_PRIORITY Global
Editor (E) – select (L) – the highest selection priority face (A) Shift+G UG_SEL_FACE_PRIORITY global.
Editor (E) – select (L) – highest selection priority – body (B) Shift+B UG_SEL_BODY_PRIORITY Global
Editor (E) – select (L) – highest selection priority – edge (E) Shift+E UG_SEL_EDGE_PRIORITY Global
Editor (E) – select (L) – highest selection priority – component (C) Shift+C UG_SEL_COMPONENT_PRIORITY Global
Editor (E) – select (L) – select (A) Ctrl+A UG_SEL_SELECT_ALL Global
Editor (E) – object display (J)… Ctrl+J UG_EDIT_OBJECT_DISPLAY Global
Editor (E) – display and hide (H) – display and hide (O)… Ctrl+W UG_EDIT_MD_SHOWHIDE_ALL Global
Editor (E) – display and hide (H) – immediately hide (M)… Ctrl+Shift+I UG_EDIT_ONE_PICK_HIDE Global
Editor (E) – display and hide (H) – Hide (H)… Ctrl+B UG_EDIT_BLANK_SELECTED Global
Editor (E) – display and hide (H) – display (S)… Ctrl+Shift+K UG_EDIT_UNBLANK_SELECTED
Overall situation
Editor (E) – display and hide (H) – all display (A) Ctrl+Shift+U
UG_EDIT_UNBLANK_ALL_OF_PART Overall situation
Editor (E) – display and hide (H) – reverse display and hide (I) Ctrl+Shift+B UG_EDIT_REVERSE_BLANK_ALL Global
Editor (E) – moving object (O)… Ctrl+T UG_EDIT_MOVE_OBJECT Global
Edit (E) – sketch curve (K)… – fast pruning (Q)… T UG_SKETCH_QUICK_TRIM applies only modules.
Editor (E) – sketch curve (K)… – fast extension (X)… E UG_SKETCH_QUICK_EXTEND applies only modules.
View (V) – operation (O) – suitable for window (F) Ctrl+F UG_VIEW_FIT Global
View (V) – operation (O) – scaling (Z)… Ctrl+Shift+Z UG_VIEW_ZOOM Global
View (V) – operation (O) – rotation (R)… Ctrl+R UG_VIEW_ROTATE Global
View (V) – cross section (S) – edit work cross section (C)… Ctrl+H UG_VIEW_SECTIONING Global
View (V) – visualization (V) – high quality image (H)… Ctrl+Shift+H UG_VIEW_HIGH_QUALITY_IMAGE Global
View (V) – layout (L) – new (N)… Ctrl+Shift+N UG_LAYOUT_NEW Global
View (V) – layout (L) – Open (O)… Ctrl+Shift+O UG_LAYOUT_OPEN Global
View (V) – layout (L) – suitable for all views (F) Ctrl+Shift+F UG_LAYOUT_FIT_ALL_VIEWS Global
View (V) – information window (I) Ctrl+Shift+S UG_VIEW_INFO_WINDOW Global
View (V) -HD3D tool UI Ctrl+3 UG_VIEW_VISUAL_PLM_UI Global
View (V) – full screen (F) Alt+Enter UG_VIEW_FULL_SCREEN_MODE Global
View (V) – oriented view to sketch (K) Shift+F8
UG_SKETCH_ORIENT_VIEW_TO_SKETCH
Application module only
View (V) – reset the azimuth (E) Ctrl+F8 UG_VIEW_RESET_ORIENTATION Global
Insert (S) – sketch curve (S) – Outline (O)… Z UG_SKETCH_PROFILE applies only modules.
Insert (S) – sketch curve (S) – straight line (L)… L UG_SKETCH_LINE applies only modules.
Insert (S) – sketch curve (S) – circular arc (A)… A UG_SKETCH_ARC applies only modules.
Insert (S) – sketch curve (S) – circle (C)… O UG_SKETCH_CIRCLE applies only modules.
Insert (S) – sketch curve (S) – fillet (F)… F UG_SKETCH_FILLET applies only modules.
Insert (S) – sketch curve (S) – rectangle (R)… R UG_SKETCH_RECTANGLE applies only modules.
Insert (S) – sketch curve (S) – polygon (Y)… P UG_SKETCH_POLYGON applies only modules.
Insert (S) – sketch curve (S) – Art spline (D)… S UG_SKETCH_STUDIO_SPLINE applies only modules.
Insert (S) – sketch constraint (K) – size (D) – automatic judgement (I)… D UG_SKETCH_INFER_DIM applies only modules.
Insert (S) – sketch constraint (K) – constraint (T)… C UG_SKETCH_CONSTRAINTS
Application module only
Insert (S) – design feature (E) – stretch (E)… X
UG_MODELING_EXTRUDED_FEATURE Application module only
Insert (S) – surface (R) – four point surface (F)… Ctrl+4 UG_MODELING_FF_SURF4P applies only modules.
Insert (S) – mesh surface (M) – Art surface (U)… N UG_MODELING_FF_STUSRF_NXN applies only modules.
Insert (S) – sweep (W) – change sweep (V)… V UG_MODELING_VSWEEP_FEATURE applies only modules.
Format (R) – layer setting (S)… Ctrl+L UG_LAYER_SETTINGS Global
Format (R) – the visible layer (V) in the view… Ctrl+Shift+V UG_LAYER_VIEW global.
Format (R) -WCS- display (P) W UG_WCS_DISPLAY Global
Tool (T) – expression (X)… Ctrl+E UG_INSERT_DLEXPRESSION Global
Tool (T) – Update (U) – set the first feature to the current (F) Ctrl+Shift+Home.
UG_MODELING_FEATURE_REPLAY_MAKE_FIRST_CURRENT Application module only
Tool (T) – Update (U) – set the last feature to the current (P) Ctrl+Shift+Left Arrow.
UG_MODELING_FEATURE_REPLAY_MAKE_PREVIOUS_CURRENT Application module only
Tool (T) – Update (U) – set the next feature to the current (N) Ctrl+Shift+Right Arrow.
UG_MODELING_FEATURE_REPLAY_MAKE_NEXT_CURRENT Application module only
Tool (T) – Update (U) – set the last feature to the current (L) Ctrl+Shift+End.
UG_MODELING_FEATURE_REPLAY_MAKE_LAST_CURRENT Application module only
Tool (T) – operation record (J) – play (P)… Alt+F8 UG_JOURNAL_PLAY Global
Tool (T) – operation record (J) – edit (E)… Alt+F11 UG_JOURNAL_EDIT Global
Tools (T) – macro (R) – start recording (R)… Ctrl+Shift+R UG_MACRO_RECORD Global
Tools (T) – macro (R) – playback (P)… Ctrl+Shift+P UG_MACRO_PLAYBACK Global
Tools (T) – Movie (E) – recording (R)… Alt+F5 UG_MOVIE_RECORD Global
Tools (T) – Movie (E) – pause (P) Alt+F6 UG_MOVIE_PAUSE Global
Tools (T) – Movie (E) – stop (S) Alt+F7 UG_MOVIE_STOP Global
Tools (T) – customize (Z)… Ctrl+1 UG_TOOLS_CUSTOMIZE Global
Tools (T) – duplicate command (R) -1 shortcut key Shift+Space
UG_TOOLS_REPEAT_LAST_COMMAND_0 Overall situation
Information (I) – object (O)… Ctrl+I UG_INFO_OBJECT Global
Analysis (L) – curve (C) – refresh curvature graph (R) Ctrl+Shift+C UG_INFO_MB_SHOW_GRAPHS Global
Preferences (P) – object (O)… Ctrl+Shift+J UG_PREFERENCES_OBJECT Global
Preferences (P) – select (E)… Ctrl+Shift+T UG_PREFERENCES_SELECTION Global
Application (N) – Modeling (M)… Ctrl+M UG_APP_MODELING Global
M Overall situation
Application (N) – appearance design (T), Ctrl+Alt+S UG_APP_STUDIO overall situation.
Application (N) – Cartography (D)… Ctrl+Shift+D UG_APP_DRAFTING Global
Application (N) – processing (N)… Ctrl+Alt+M UG_APP_MANUFACTURING Global
Application (N) – sheet metal (H) -NX sheet metal (H)… Ctrl+Alt+N UG_APP_SBSM Global
Application (N) – flexible printed circuit design (X)… Ctrl+Alt+P UG_APP_FLEX_PCB Global
Complete the sketch (K) Ctrl+Q UG_DIRECT_SKETCH_FINISH applies only modules.
Q Application module only
Directional view to sketch (K) Shift+F8
UG_SKETCH_ORIENT_VIEW_TO_SKETCH
Apply only module refresh (S) F5 UG_VIEW_POPUP_REFRESH global.
Zoom (Z) F6 UG_VIEW_POPUP_ZOOM Global
Rotation (O) F7 UG_VIEW_POPUP_ROTATE Global
Rendering style (D) – S (F2) UG_VIEW_POPUP_SHADED Global
Rendering style (D) – static W (F3)
UG_VIEW_POPUP_STATIC_WIREFRAME
Global rendering style (D) – object display (J)… Ctrl+J UG_EDIT_OBJECT_DISPLAY Global
Directional view (R) – positive two view (T) F1 UG_VIEW_POPUP_ORIENT_TFRTRI Global
Directional view (R) – positive equal view (I) End UG_VIEW_POPUP_ORIENT_TFRISO Global
Directional view (R) – top view (O) Ctrl+Alt+T UG_VIEW_POPUP_ORIENT_TOP Global
Directional view (R) – front view (F) Ctrl+Alt+F UG_VIEW_POPUP_ORIENT_FRONT Global
Directional view (R) – right view (R) Ctrl+Alt+R UG_VIEW_POPUP_ORIENT_RIGHT Global
Directional view (R) – left view (L) Ctrl+Alt+L UG_VIEW_POPUP_ORIENT_LEFT Global
Capture view (N) F8 UG_VIEW_POPUP_SNAP_VIEW Global
Paste (P) Ctrl+V UG_EDIT_PASTE Global
Duplicate command (R) -1 shortcut key Shift+Space
UG_TOOLS_REPEAT_LAST_COMMAND_0
Overall situation