Learn Embedded 4412 Development Board, Add Android 5.1.1 Porting Course, Mobus Porting Course, Python Porting Course
1: 4412 development board fifth comprehensive upgrading
1.New Python transplant tutorial, MODBUS transplant tutorial, Android5.1.1 migration tutorial
2.Linux-QTStart with the latest version 5.7
3.AndroidThe application development environment is updated to Studio and provided simultaneously with eclipse.
4.iTOP-4412The development board gets the official support of the open source software Linux, which will greatly facilitate the technological upgrading of user products.
Two: new smart home supporting ZigBee module, USB-WIFI and so on.
The supporting modules can cover Internet of Things, industrial field, intelligent terminals, robotic instrumentation and other applications including: SDIO-WIFI, USB-WIFI, GPS, Bluetooth, AV-IN, USB camera, CAN bus, parallel camera, VGA, RS-485, relay, etc.Serial port, matrix keyboard, ZigBee, etc.
Three: standard storage capacity from 4G 8G to meet storage requirements.
Four: video tutorials: free video tutorials (Xun Wei front-line R & D Engineer recording – constantly updated)
The first part of the Xun Wei electronic development board entry video (quantity: 53)
The second part is iTOP-4412 development board hardware design guidance video (quantity: 4).
The third part of uboot tutorial (quantity: 10)
The fourth part of Linux system programming (quantity: 69)
The fifth part is Linux-x86-Qt5.3.2 and QtE4.7.1 application video (quantity: 5).
The sixth part of Linux driver tutorial (quantity: 44)
The seventh part of Xun Wei electronic Java video tutorial (quantity: 14)
The eighth part of Android application video (quantity: 9)
The ninth part of Android Application Tutorial 2015 (quantity: 11)
Attached bare program experiment document and tool file (quantity: 1)
Fifth: The matching book “iTOP-4412 series of development board actual combat tutorial” is written by Xun for engineers, this book is suitable for Xun for the iTOP-4412 elite edition, all-around edition of the tutorial materials, but also for the hope of quickly grasping the embedded development novice and embedded enthusiasts reference materials.
Core board parameters:
Size: 50mm*60mm
Height: together with connectors, 0.26cm
CPU：Exynos4412，Quad core Cortex-A9, the main frequency is 1.4GHz-1.6GHz
Memory: 1GB dual channel DDR3 (2GB optional)
Storage: 4GB EMMC (16GB optional)
Power management: low power, dynamic Samsung S5M8767 power management, optimal architecture!
Working voltage: 2.65V–5.5V (recommended 4.0V)
System support: Linux-QT/Android4.2/Ubuntu operating system
USB HOST：Onboard USB3503 leads to high performance HSIC, achieving 2 channel USB HOST output.
Corner extension: up to 320 lead feet to meet all kinds of expansion needs of users.
Operating temperature: -25 to +80 degrees, the equipment works normally and runs well.
Floor parameter
Size: 110mm*190mm
SWITCH：Power interface
RESET：1Reset button
POWER：DC power input interface, 5V/2A power input
TF Card：1Standard TF card interface
USB Host：2Road USB Host, support USB2.0 protocol
USB OTG：1Road USB OTG 2
Ethernet port: 10M/100M adaptive network port
PHONE：headphone
MIC：Support MIC input
Serial port: 2 way serial port
A/D：1road
User Key：5Function buttons
DIP SWITCH：1individual
GPIO：20PIN（Power and ground)
CAMERAInterface: 1 (supports 2 million and 5 million cameras)
WIFIInterface: 1
HDMIInterface: Standard HDMI v1.41080p HD resolution output
LCDInterface: a total of 3, 2 LVDS interfaces, and 1 RGB interfaces.
LCDPower switch: 1
MIPIInterface: 1
Real time clock: internal real time clock, with backup lithium battery holder. After power failure, system time is not lost.
BUZZER：1A buzzer
JTAGInterface: 1